|Diamond Logic® Builder Web|
Diamond Logic® Builder uses standard RP1210A drivers for communication. Drivers are specific to the communications device and are not installed with Diamond Logic® Builder. You can download the latest International® drivers tested with Diamond Logic® Builder from this page.
Users of the EZ-Tech platform should follow normal procedures for software updates and should not download these drivers.
You must log in to download these drivers.
|NAVCoM NAVLink||1.6.4||Web Site Download||Follow instructions on Web Site|
|Nexiq USB||184.108.40.206||Web Site Download||Follow instructions on Web Site|
|Noregon DLA USB+||220.127.116.11||Web Site Download||Follow instructions on Web Site|
|Cummins Inline 5||See the Cummins Support Website|
|International®International® EZ-Tech™ IC4 USB ***Product Code U8352***||1.94||Log In and Download||Save downloaded file as .zip, extract the file and run setup.exe it to install driver.|
|International®International® EZ-Tech™ IC4 USB DLB extention
*NOTE* you must already have the driver that came with the cable installed.
|0.21||Log In and Download||Save downloaded file as .exe and run it to install driver patch.|
|International®International® EZ-Tech™ IC3 COM||2.21||Log In and Download||Save downloaded file as .exe and run it to install driver.|
|International®International® J1939 Interface||2.4||Log In and Download||Save downloaded file as .exe and run it to install driver.|
Other devices which have been tested with Diamond Logic® Builder.
|Dearborn DPA4 DPA4+||5.55||Web Site|
|Dearborn Protocol Adapter II Plus, 3 and 4||4.6||Web Site|