Diamond Logic® Builder Web |
Diamond Logic® Builder uses standard RP1210A drivers for communication. Drivers are specific to the communications device and are not installed with Diamond Logic® Builder. You can download the latest International® drivers tested with Diamond Logic® Builder from this page.
Users of the EZ-Tech platform should follow normal procedures for software updates and should not download these drivers.
You must log in to download these drivers.
Device | Driver Version | Download | Install |
NAVCoM NAVLink | 1.6.4 | Web Site Download | Follow instructions on Web Site |
Nexiq USB | 8.1.1.0 | Web Site Download | Follow instructions on Web Site |
Noregon DLA USB+ | 3.0.24.0 | Web Site Download | Follow instructions on Web Site |
Cummins Inline 5 | See the Cummins Support Website | ||
International®International® EZ-Tech™ IC4 USB ***Product Code U8352*** | 1.94 | Log In and Download | Save downloaded file as .zip, extract the file and run setup.exe it to install driver. |
International®International® EZ-Tech™ IC4 USB DLB extention *NOTE* you must already have the driver that came with the cable installed. |
0.21 | Log In and Download | Save downloaded file as .exe and run it to install driver patch. |
International®International® EZ-Tech™ IC3 COM | 2.21 | Log In and Download | Save downloaded file as .exe and run it to install driver. |
International®International® J1939 Interface | 2.4 | Log In and Download | Save downloaded file as .exe and run it to install driver. |
Other devices which have been tested with Diamond Logic® Builder.
Device | Driver Version | Download |
Dearborn DPA4 DPA4+ | 5.55 | Web Site |
Dearborn Protocol Adapter II Plus, 3 and 4 | 4.6 | Web Site |